- 1、本文档共55页,可阅读全部内容。
- 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
- 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载。
- 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
优秀设计
全套CAD图纸,联系qq 174320523 各专业都有
全套完整版CAD图纸,联系 174320523 各专业都有
摘 要
本次设计的指接机端面铣削部分是应用于普及型欧式木窗加工的专用设备,通过指接技术降低类似于欧式木窗的木工产品的生产成本,提高其市场竞争力。
通过对国内外指接设备的分析,在考虑生产成本的基础上,设计了能够满足一般指接需求的设备,并根据较小尺寸对刀具系统进行了完善,使本机床的刀具系统适用较小截面尺寸的木工产品的指榫加工。刀具主轴转速较高,并承受一定的扭矩,文中对其进行了受力分析,确保其在生产中的安全性,同时对其附属部分,如带传动和轴承等进行了校核计算。木材原料夹紧机构采用弹簧压紧,对弹簧力进行了分析,确保在最省力的情况下使木材原料顺利加工。
本题目从生产实际出发,为小径木材指榫加工设计关键设备,对现有的指接机进行改进设计,降低指接生产线成本,使指接技术得以普及。对于我国中小型木工企业的生产改型和技术革新有重要的意义。
关键词:木材;指接;指榫;欧式木窗;木工机械
ABSTRACT
The machine that we designed is a milling installation which is used for the machining of the popularized western-style wooden window. By applying this kind of knowledge, we could reduce the production costs of those products as western-style wooden window and enhance its competitive power.
Through the analysis of both the domestic and the foreign tenoners and on the basis of the consideration of its production costs, we have designed this kind of equipment which could meet the need for the joint of general tenon need raw materials and have made approve-ments to its tool system. Through this change, we have made its tool system more applicable for the joint of those products in smaller section size. The tool’s primary shaft works in higher rotational speed and withstands certain torque. We have carried out the force analysis in this article to make sure its security and have made checkouts to its accessorial parts, such as transmission belt and transmission shaft and so on. Through the analysis of the spring force, we uses the spring to compact in the lumber raw material jig system to make sure that the lumber raw materials could clamp smoothly in the situation which uses the minimum forces.
Combined from infact of product, this topic is set up both for the design of the key equipments which are used for the machining of this small materials and to make approvements to the existing tenoners so as to reduce the costs of the connect production line and to make this technique popular. With regard to our middle and
您可能关注的文档
- 啤酒贴标机设计(含有全套CAD图纸).doc
- 偏心连杆式紧压茶叶机的设计(含有全套CAD图纸).doc
- 乒乓球拣拾器设计及运动仿真(含有全套CAD图纸).doc
- 平面关节型机械手设计(完整图纸).doc
- 瓶盖拉深模的设计(有全套图纸).doc
- 瓶盖注射模设计(有全套图纸).doc
- 瓶塞注射模设计(有全套图纸).doc
- 普通CA6140车床的经济型数控改造(有全套图纸).doc
- 普通CA6150车床数控化技术改进(有全套图纸).doc
- 普通式双柱汽车举升机设计(有全套图纸).doc
- GB/T 29324-2024架空导线用碳纤维增强复合材料芯.pdf
- 《GB/T 29324-2024架空导线用碳纤维增强复合材料芯》.pdf
- GB/T 43905.1-2024焊接及相关工艺中烟尘和气体取样的实验室方法 第1部分:电弧焊中烟尘排放速率的测定和分析用烟尘的收集.pdf
- 《GB/T 43905.1-2024焊接及相关工艺中烟尘和气体取样的实验室方法 第1部分:电弧焊中烟尘排放速率的测定和分析用烟尘的收集》.pdf
- 中国国家标准 GB/T 43905.1-2024焊接及相关工艺中烟尘和气体取样的实验室方法 第1部分:电弧焊中烟尘排放速率的测定和分析用烟尘的收集.pdf
- 中国国家标准 GB/T 18910.21-2024液晶显示器件 第2-1部分:无源矩阵单色液晶显示模块 空白详细规范.pdf
- GB/T 18910.21-2024液晶显示器件 第2-1部分:无源矩阵单色液晶显示模块 空白详细规范.pdf
- 《GB/T 18910.21-2024液晶显示器件 第2-1部分:无源矩阵单色液晶显示模块 空白详细规范》.pdf
- GB/T 43860.1220-2024触摸和交互显示 第12-20部分:触摸显示测试方法 多点触摸性能.pdf
- 中国国家标准 GB/T 43860.1220-2024触摸和交互显示 第12-20部分:触摸显示测试方法 多点触摸性能.pdf
文档评论(0)