- 1、本文档共52页,可阅读全部内容。
- 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
- 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载。
- 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
本科毕业设计(论文) ——新型马路划线机设计
新型马路划线的机设计
摘 要
马路划线机广泛应用于道路、停车场、机场等环境的标记线铺设中,目前市场上常用的有手推式划线机和智能划线机。手推式划线机工人劳动强度大,难以铺设均匀间隔线,而智能划线机成本高昂,且基本依赖进口,难以大面积推广。
通过对国内外现有现状及关键技术的分析,本文对手推式马路划线机进行系统的分析、改进,设计出了一种以电动机为动力源,以制动装置作为整个系统的控制核心,以变速器作为驱动核心,加以相应的辅助电路完成了整个系统的设计,包括过滤系统,搅拌系统,保温系统,传动系统等设计。并设计了设计整机外观,通过设计手推式车轮结构以及圆筒形的料筒,使其外观看起来简洁,划线整齐顺畅,方便操作。以上设计保证了自走式划线机的结构设计要求。通过机构改进实现了常规间断标记线的铺设,将自动化和低成本统一起来,实现划线设备的升级。满足功能要求。
关键词:划线机;电动机;机构改进;间断标记;
New Design of Road Marking Machine
Abstract
Road marking machine is widely used in road, parking lot, airport, etc environment tag line laying, has hand push type on the market at present commonly used marker and intelligent marking machine. Hand push type marking machine workers labor intensity big, hard line laid evenly spacing, and the intelligence of the high cost of marker and basic dependent on imports, difficult to large area promotion.
Through the analysis of existing status and key techniques at home and abroad, this article rivals push road marker systems analysis, improvement, devised a motor as power source, with brake as the control core of the whole system, with transmission as a core, take the corresponding auxiliary circuit to complete the design of the entire system, including the filtering system, mixing system, insulation system, transmission system design. And designed the machine appearance design, through the design hand push type wheel structure and cylindrical cylinder, make its appearance looks clean, neat line is smooth, convenient operation. The above design ensures the self-propelled marker and structural design requirements. By improved the conventional intermittent tag line laying, to unify the automation and low cost, realize marking equipment upgrade. Meet the functional requirements.
Key Words:arking machine; Motor; Institutional improvement; Discontinuity marker.
目 录
摘 要 1
Abstract 2
1 绪 论 1
1.1 背景及意义 1
1.2 划线机的研究背景 1
1.2.1 国内背景及现状分析 1
1.2.2国外背景及现状分析 2
1.3划线机的分类 2
1.3.1依器械载体分类 3
1.3.2依施工原料分类 3
1.3.3划
您可能关注的文档
- 机械臂式搬运机器人毕业设计论文稿件.docx
- 机械加工工艺规程及工艺文件英文文献翻译.doc
- 基于EPON+EOC技术的宽带接入系统研究与设计毕业设计(含外文翻译).doc
- 基于EPON技术的光纤到楼-户的小区宽带接入网的研究与设计毕设说明书(含外文翻译).doc
- 基于ORCAD的模拟滤波器设计毕业论文+外文翻译.doc
- 基于PLC的农产品加工机械性能检测系统硬件设计论文+外文翻译.doc
- 基于SINUMERIK-802D-sl系统的XH400数控铣床电气设计毕业设计论文(机械工程及自动化).doc
- 基于插值的MIMO-OFDM无线信道估计方法的研究毕业论文+程序源代码.doc
- 基于单片机的智能插座的设计毕业论文_含电路图.doc
- 基于电磁驱动的低频扭振系统的设计说明书.docx
- 【可行性报告】2023年钻探机械相关项目可行性研究报告.docx
- 【可行性报告】2023年高锰钢相关行业可行性分析报告.docx
- 学业水平自我评价(通用5篇).pdf
- 【可行性报告】2023年鼠药解毒药行业项目可行性分析报告.docx
- 【可行性报告】2023年高温气冷堆及配套产品相关项目可行性研究报告.docx
- 【可行性报告】2023年铁矿石相关行业可行性分析报告.docx
- 【可行性报告】2023年铝箔材料相关项目可行性研究报告.docx
- 【可行性报告】2023年汽车变速器项目可行性研究分析报告.docx
- 【可行性报告】2023年麻醉临床信息系统相关项目可行性研究报告.docx
- 小学英语知识竞赛活动方案.pdf
文档评论(0)