- 1、本文档共32页,可阅读全部内容。
- 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
- 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载。
- 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
买文档后送图纸,QQ194535455
买文档后送图纸,QQ 194535455
车床组合夹具设计
摘 要
根据六点定位原理和定位基准的选择原则,采用长V型块,支承块和定位挡铁定位。长V型块置于拱形肋板后限制x轴的两自由度和z轴的两自由度,挡铁置于孔端限制绕y轴旋转的自由度,支承块置于肋板下方限制沿y轴移动的自由度。依据相关原理计算定位误差。根据夹紧方式的选择原则,选择夹紧元件为压板压头和V型块,然后通过切削力进行夹紧力的计算。夹紧的动力装置选用手动压紧装置。按照定位元件和夹紧元件设计连接件。
以所选元件和装置为基础确定夹具总体布局和夹具体的结构形式,并确定好定位元件在夹具体上的位置。绘制夹具方案设计,进行工序精度分析。对以上设计进行审核。最后设计夹具总装配图。
关键词:组合夹具;定位;夹紧;三通接头
Lathe modular jig and fixture design
Abstract
According to six localizations principles and selection principle of the localization datum, using the long V block, the supporting block and the localization comes true the hard localization. The long V block putted in the arch ribbed plate to limit two degrees of freedom in the x axis and the z axes two degrees of freedom, the iron putted in the hole end limit to the degree of freedom which circle the y rotation of axis, the supporting block putted under the ribbed plate to limit degree of freedom along the y axis migration. Position error is reckoned by the correlation principle. According to the way of the selection principle, discharge head and V block is selected to clamp the part. Then computation of the strength is achieved by carrying on through the cutting force clamps. The power of clamps is from the hydraulic unit. Design of bridge piece is according to the location part and the clamp part. The guide part designing in this topic is not requested because the cutter bar is short. Other parts and equipment are designed following last process.
The jig overall arrangement and concrete structure of the body clamp are determined with the above part and the equipment. The position of the components in the kits specific location must be guaranteed, and then design the jig, carry on the working procedure precision analysis. The design review is following. Finally the jig assembly drawing is achieved.
Keywords: Modular jig and fixture; location; clamp; union tee
目 录
1绪论…………………………………………………………………………………1
1.1概述…………………………………………………………………………………1
1.1.1车床夹具的分类…………………………
您可能关注的文档
- 半自动钵盘精密播种机的设计(含CAD图纸全套).doc
- 半自动轮胎拆装机毕业设计(含CAD图纸全套).doc
- 半自动平压模切机设计(含CAD图纸全套).doc
- 半自动苹果套袋机的设计(含CAD图纸全套).doc
- 半自动锁盖机的设计(包装机机械设计)(含CAD图纸全套).doc
- 半自动钻床工作机构设计(含CAD图纸全套).doc
- 半自动钻床设计及运动学分析【proe+仿真】(含CAD图纸全套).doc
- 棒料切割机设计(含CAD图纸全套).doc
- 棒料切割机设计论文(含CAD图纸全套).doc
- 棒线材φ450轧机的设计(含CAD图纸全套).doc
- 新的一年工作展望.docx
- 医生年终个人工作的述职报告(3篇).docx
- 2023年消防设施操作员之消防设备中级技能考前冲刺练习题附答案详解.docx
- 2022-2023年环境影响评价工程师之环评技术导则与标准通关练习题包括详细解答.docx
- 2023年中级注册安全工程师之安全生产管理考前冲刺检测卷和答案.docx
- 2023年中级银行从业资格之中级银行管理考前冲刺测试卷提供答案解析.docx
- 2023年公共营养师之二级营养师通关模拟考试试卷附带答案.docx
- 证券分析师之发布证券研究报告业务考前冲刺模拟题库.docx
- 2022-2023年二级建造师之二建建设工程法规及相关知识综合提升测试卷附答案.docx
- 2023年二级建造师之二建机电工程实务通关模拟考试试卷提供答案解析.docx
文档评论(0)