电气辅助系统运行手册.doc

GNPower Mariveles Power Plant 电气运行手册Electrical Operation Manual 第1卷03 Volume 1 of No.03 第一版 Edition No: 1 Owner: GNPower Mariveles Coal Plant Ltd.Co Prepared by: CNEEC 菲律宾马利万斯2×300MW燃煤电厂项目 GN Power Mariveles Power Plant 电气辅助系统运行手册 Auxiliary System of Electric Operation Manual 编制人 提交时间 翻译人 提交时间 审核人 提交时间 其他说明 Compiled by Submission time Translated by Submission time Approved by Submission time Others 第一版 2011.12.20 何丽红 He Lihong 2012.02.15 第二版Edition No.2 第三版Edition No.3 合同号： Contract No. GNPOWER MARIVELES COAL PLANT LTD.CO 中国电力工程有限公司 CHINA NATIONAL ELECTRIC ENGINEERING CO.,LTD 批准APPROVED BY 日期DATE 合同号： Contract No. 审核REVIEWED BY 日期DATE 校对CHECKED BY 日期DATE REV 编制PREPARED BY 日期DATE 目 录 Content1 电动机 1 Motor 1.1 概述 1.1 Overview 电动机6kV、交流400V、直流220V三类，主要是用来驱动机组辅机，保证电能的安全、稳定输出。 Motor could be divided into 6 KV motor 、400 V AC motor and 220V DC motor three kinds, it is mainly used for driving auxiliaries of unit to guarantee the safe and stable power output. 大于185KW的电机及大于400A的静态负荷采用6KV母线供电；75 kW 至 185kW 的电动机与150A 至 400A的静态负荷由PC供电；低于75KW电动机及低于150A的静态负荷由MCC供电；直流电机采用直流220V系统供电。 6KV BUS will be provided to serve motor loads more than 185kW and non-motor loads more than 400A in rating. PC equipment will be provided to serve motor loads from 75 kW to 185kW and non-motor loads from 150A to 400A in rating. MCC equipment shall be provided to serve motor loads through 75 kW and non-motor loads through 150A in rating.DC 220V will be provided to serve DC motor loads. 1.2 设备布置图 1.2 Equipment Layout 图1 6kV电动机图2400V电动机 Picture 1 6 KV motorPicture 2 400 V motor 1.3 主要电动机技术参数 1.3 Main technical parameters for motors 参照电气保护装置定值清单； According to the setting list of electric protection devices. 1.4 电动机保护装置 1.4 Motor protection device 1.4.1 6KV电动机的综保装置 1.4.1 6KV motor integrated protection device 序号 SEL-710（容量大于或等于2000HP（1471KW）） SEL-710（容量小于2000HP（1471KW）） No SEL