- 1、本文档共49页,可阅读全部内容。
- 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
- 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载。
- 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
* * * * p-well Formation1)第二层掩膜2) P井注入(高能)3)退火 Figure 9.9 p+ Silicon substrate Boron implant Photoresist 1 p- Epitaxial layer Oxide 3 n-well 2 p-well 二、浅曹隔离工艺A STI 槽刻蚀1)隔离氧化2)氮化物淀积3)第三层掩膜4)STI槽刻蚀(氮化硅的作用:坚固的掩膜材料,有助于在STI氧化物淀积过程中保护有源区;在CMP中充当抛光的阻挡材料。) Figure 9.10 +Ions Selective etching opens isolation regions in the epi layer. p+ Silicon substrate p- Epitaxial layer n-well p-well 3 Photoresist 2 Nitride 4 1 Oxide STI trench B STI Oxide Fill1)沟槽衬垫氧化硅2)沟槽CVD氧化物填充 Figure 9.11 p-well Trench fill by chemical vapor deposition 1 Liner oxide p+ Silicon substrate p- Epitaxial layer n-well 2 Nitride Trench CVD oxide Oxide C STI Formation1)浅曹氧化物抛光(化学机械抛光)2)氮化物去除 Figure 9.12 p-well 1 2 Planarization by chemical-mechanical polishing STI oxide after polish Liner oxide p+ Silicon substrate p- Epitaxial layer n-well Nitride strip 三、Poly Gate Structure Process 晶体管中栅结构的制作是流程当中最关键的一步,因为它包含了最薄的栅氧化层的热生长以及多晶硅栅的形成,而后者是整个集成电路工艺中物理尺度最小的结构。1)栅氧化层的生长2)多晶硅淀积3)第四层掩膜4)多晶硅栅刻蚀 Figure 9.13 p+ Silicon substrate Gate oxide 1 2 p- Epitaxial layer n-well p-well Polysilicon deposition Poly gate etch 4 3 Photoresist ARC 四、轻掺杂源漏注入工艺 随着栅的宽度不断减小,栅下的沟道长度也不断减小。这就增加源漏间电荷穿通的可能性,并引起不希望的沟道漏电流。LDD工艺就是为了减少这些沟道漏电流的发生。 A n- LDD Implant1)第五层研磨2) n-LDD注入(低能量,浅结) Figure 9.14 p+ Silicon substrate p- Epitaxial layer n-well p-well n- n- n- 1 Photoresist mask Arsenic n- LDD implant 2 B p- LDD Implant1)第六层掩膜2)P- 轻掺杂漏注入(低能量,浅结) Figure 9.15 p+ Silicon substrate p- Epitaxial layer n-well p-well Photoresist Mask 1 p- p- Photoresist mask 1 n- n- 2 BF p- LDD implant 2 p- n- 五、侧墙的形成 侧墙用来环绕多晶硅栅,防止更大剂量的源漏(S/D)注入过于接近沟道以致可能发生的源漏穿通。1)淀积二氧化硅2)二氧化硅反刻 Figure 9.16 +Ions p+ Silicon substrate p- Epitaxial layer n-well p-well p- p- 1 Spacer oxide Side wall spacer 2 Spacer etchback by anisotropic plasma etcher p- n- n- n- 六、源/漏注入工艺A n+ Source/Drain Implant1)第七层掩膜2)n+源/漏注入 Figure 9.17 p+ Silicon substrate p- Epitaxial layer n-well p-well n+ Arsenic n+ S/D implant 2 Photoresist
您可能关注的文档
- 9 耐火材料不定形耐火材料.ppt
- 3dmax制作三维地形图.docx
- 9- 悬挑式脚手架施工方案.doc
- 9(宋占峰)轨道控制网(CPⅢ) 的高程测量.pptx
- 9高尔夫球场景观及会所设计.ppt
- 9.金属一(s区、ds区)(许英慧).ppt
- 3_光源在视觉中的作用及选型指导.ppt
- 3D打印机使用经验交流.ppt
- 9.水泵与水泵站2.11吸水性能 汽蚀与安装高度.ppt
- 3_形状和位置公差-高清.ppt
- 新的一年工作展望.docx
- 医生年终个人工作的述职报告(3篇).docx
- 2023年消防设施操作员之消防设备中级技能考前冲刺练习题附答案详解.docx
- 2022-2023年环境影响评价工程师之环评技术导则与标准通关练习题包括详细解答.docx
- 2023年中级注册安全工程师之安全生产管理考前冲刺检测卷和答案.docx
- 2023年中级银行从业资格之中级银行管理考前冲刺测试卷提供答案解析.docx
- 2023年公共营养师之二级营养师通关模拟考试试卷附带答案.docx
- 证券分析师之发布证券研究报告业务考前冲刺模拟题库.docx
- 2022-2023年二级建造师之二建建设工程法规及相关知识综合提升测试卷附答案.docx
- 2023年二级建造师之二建机电工程实务通关模拟考试试卷提供答案解析.docx
文档评论(0)