safety instructions.ppt

ASM 1.3 Machine Descriptions : General Safety General Safety Instructions Do not operate the machine before one has understood the safety functions. Ensure operators are clear of the safety instructions. Check at regular intervals and ensure all safety devices are in good conditions. Faulty devices must be repaired or replaced before working on the machine. Ensure that all guards and safety devices are not removed or deactivated. Repairs, adjustments, or maintenance should be accomplished only by trained and authorized personnel. Before machine is turned on, ensure that all the locations of EMERGENCY buttons are known. Keep working area clean and tidy. Working area must be well lighted. In case of electrical fire, powder type extinguisher must be used. A fire extinguisher should be located within reach (Consult your fire safety officer for advice ) General Safety Instructions for Operators Technicians Correct operating method (mechanical software) must be understood. ‘Trial and Error’ operating method is strictly prohibited. Unauthorized operators are prohibited. Loose clothing must not be worn. Attire must always be buttoned properly. Proper gloves must be worn while handling hot surfaces. Loading tools must be used when needed for placing or removing of parts. Ear plugs must be worn during operation. Safety boots must be worn during operation and handling mold chase. Periodical maintenance must be done to ensure the operating sound level does not exceed 80dB. During inspection or maintenance, only maintenance staff are allowed at the machine area. Maintenance signs must be located at proper places. Machine modifications are strictly prohibited! Some of the doors and covers are designed with safety locks, in which the machine will not operate if any of the openings is improperly closed. If this feature fails, please inform ASM or our agent immediately and stop operating before the problem is f