ABAQUS_Moldflow 界面操作演示.ppt

Abaqus/Moldflow 界面操作演示 許志芬 — Moldflow Taiwan 劉孟龍 — 愛發有限公司 Installation of Moldflow Structural Alliance (MSA 1.0.3) Installation of Moldflow Structural Alliance (MSA) Finish the MSA installation Add MSA commands in Abaqus_v6.env file Indicate MSA Plug_Ins to Abaqus MSA shows up in Abaqus Plug_Ins Operation of Abaqus/MoldflowMSA Method Export Moldflow STL File Import or Create Parts in Abaqus Define material property as User Material: Assign material section to part Assemble parts Mesh assembly with linear or quadratic tetrahedral elements Export STL form Abaqus to Moldflow Operation of Abaqus/Moldflow MSA Method Calculate material orientations in MPI 6.1 Import STL file as the Fusion type to MPI 6.1 Creat Fusion Mesh Assign Analysis Procedure Type Select Material Containing Fibers Define Injection Location Define Process Settings (very important) Analyze Now! MPI produce *.lsp and *.sdy files which contain material data that Abaqus needs MPI will put results in the sub-directory named as project name First, you must modify *.sdy to be *.udm Second, you must change *.sdy and *.udm files to be the same name. Third, copy *.udm and *.lsp to the directory where Abaqus *.cae is. (usually means its parent-directory) Operation of Abaqus/Moldflow MSA Method Calculate material orientations in MPA 7.3 Open STL File from Abaqus Define Injection Location Select Material Containing Fibers Define Analysis Options Analysis is Proceeding Moldflow Analysis Accomplishment MPA produce *.lsp and *.udm files which contain material data that Abaqus needs Operation of Abaqus/Moldflow MSA Method Running the structural analysis in Abaqus whose material data are from MSA Create analysis steps as you need Create Loads and Constraints on the Model Create Job Submit Job by MSA Plug_Ins Key in Job name as same as you create in Abaqus Job Manage Key in the MSA results name as same as you create by MPA or MPI Compare MPA Stress Result with MPI Stress Results Compare Isotropic Stress Re