- 550
- 0
- 约3.7万字
- 约 24页
- 2018-09-19 发布于四川
-
正版发售
- 被代替
- 已被新标准代替,建议下载标准 GB/T 706-2016
- | 2008-08-19 颁布
- | 2009-04-01 实施
- 1、本标准文档共24页,仅提供部分内容试读。
- 2、本网站所提供的标准文本仅供个人学习、研究之用,未经授权,严禁复制、发行、汇编、翻译或网络传播等,侵权必究。
- 3、本网站所提供的标准均为PDF格式电子版文本(可阅读打印),因数字商品的特殊性,一经售出,不提供退换货服务。
- 4、标准文档要求电子版与印刷版保持一致,所以下载的文档中可能包含空白页,非文档质量问题
查看更多
ICS 77.140.70
H 44
GB
NATIONAL STANDARD OF
THE PEOPLE’S REPUBLIC OF CHINA
中华人民共和国国家标准
GB/T 706-2008
Replace GB/T 706-1988, GB/T 707-1988, GB/T 9787-1988, GB/T 9788-1998, GB/T 9946-1988
Hot Rolled Section Steel
热轧型钢
Issued on August 19, 2008 Implemented April 1, 2009
Jointly Issued by General Administration of Quality Supervision, Inspection and
Quarantine of the People's Republic of China
and Standardization Administration of the People's Republic of China
热轧型钢
Hot rolled section steel
1. Scope
This standard specifies the scope, term and definition, structure, dimension, appearance,
weight and tolerance, technical requirement, test method, test rules, packaging, marking and
quality certificate of hot-rolled beam steel, hot-rolled steel channel, hot-rolled equal-leg angle
steel, Hot-rolled unequal-leg angle steel and hot-rolled L-sectional steel.
This standard shall be applicable to hot-rolled equal-leg angle steel, Hot-rolled unequal-leg
angle steel, hot-rolled L-sectional steel, hot-rolled steel channel and hot-rolled beam steel with
slope on inside of led (hereinafter referred to as section steel).
2. Normative References
The following standards contain provisions which, through reference in this text, constitute
provisions of this national standard. For dated reference, subsequent amendments (excluding
amending error in the text) to, or revisions of, any of these publications do not be applie
文档评论(0)