螺丝生产工艺解析.ppt

NYLON INSERT SELF LOCK NUTS 防鬆螺帽 PREVAILING TORQUE FLANGE NUT 2:改變牙距，底徑，外徑方式達到防鬆功能 TOP LOCK NUT Hex Flexloc Lock Nut, 防鬆螺帽 PREVAILING TORQUE FLANGE NUT 防鬆螺帽 1:利用外來物壓迫螺絲達到防鬆功能 焊接產品 1:焊接螺帽 WELD NUTS 1:材質含碳量不可超過0.26，否則焊接後因急速冷卻造成淬化斷裂 2:焊接點高度高度不一造成焊接後歪斜，焊接點體積不足焊接後強度不足 3:導引部 2:焊接螺絲 WELD BOLTS 焊接螺帽 WELD NUTS 焊接螺帽 WELD NUTS Round Weld Nut 焊接螺帽 WELD NUTS T-Weld Nut Round Weld Nut 焊接螺帽 WELD NUTS 焊接螺帽 WELD NUTS 焊接螺帽 WELD NUTS 焊接螺絲 WELD BOLTS 焊接螺絲 WELD BOLTS 焊接螺絲 WELD BOLTS 六角袋帽 HEX ACORN CAP NUT ACORN CAP NUT ONE PCS TYPE 鐵蓋袋帽 CLOSED END ACORN NUTS ACORN NUT TWO PCS TYPE 齒形螺帽 KEP NUTS 盤形華司組合螺帽 CONICAL WASHER SEMS NUTS T形螺帽 T NUTS TEE NUT 4 PRONG T形螺帽 T NUTS U形螺帽 U NUTS U Clips or U nut - used for motorcycle, car, machine, furniture and home electronics SQUARE HEAD BOLTS / SQUARE HEAD SET SCREWS / THIN SQUARE HEAD BOLTS 焊接螺絲 WING NUT 焊接螺絲 環首螺絲 EYE BOLTS T頭螺絲 T HEAD BOLTS EYE BOLTS AND HOOKS 雙頭牙螺絲 DOUBLE END SCREWS WITH COLLAR 產品介紹 1:依型狀組合稱呼結束 產品介紹 2:以功能及使用場合稱呼 輪殼螺帽 WHEEL NUTS Furniture screw 傢俱螺絲 Furniture screw 傢俱螺絲 連結用螺絲 側孔螺帽 CAM & PIN 組合器 Furniture screw 傢俱螺絲 Furniture screw or Wood screw 螺絲螺栓類簡介 六角木螺絲 HEX LAG BOLTS 自攻螺絲 HEX Washer Hd Tapping screw 木螺絲 木螺絲與鐵板螺絲差異 貨櫃螺絲 CONTAINER SCREWS 電梯螺絲 ELEVATOR BOLTS 鐵板螺絲Tapping screw  Tapping screw 組合華司螺絲Tapping screw 馬桶螺絲 TOILET BOLTS 大頭馬車螺絲 STEP BOLTS / TOWER BOLTS ROUND HEAD SQUARE NECK BOLTS / FLAT HEAD SQUARE NECK BOLTS / CARRIAGE BOLTS OVAL NECK TRACK BOLTS ASTM A183-03 用來連接鐵路鐵軌的碳鋼軌道螺絲 carbon steel TRACK bolts 與碳鋼螺帽carbon steel nuts的標準規範 RIVETS AND PINS Anchor Nuts 內六角固定螺絲 HEX SOCKET SET SCREWS 輪殼螺帽 WHEEL NUTS 輪殼螺帽 WHEEL NUTS 輪殼螺帽 WHEEL NUTS 輪殼螺絲 WHEEL BOLTS 輪殼螺絲 WHEEL BOLTS 重型車螺絲 HEAVY DUTY WHEEL HUB BOLTS 防鬆螺帽 PREVAILING TORQUE FLANGE NUT 1:利用外來物壓迫螺絲達到防鬆功能 SPRING STOP SELF LOCK NUTS 樹脂張力 鋼片鎖定 NYLON INSERT SELF LOCK NUTS 防鬆螺帽 PREVAILING TORQUE FLANGE NUT TY-AB C-牙型型式介紹 MS TAPTITE HI-LO WOOD SCREW MATHREAD SPECIAL TYPE C-牙型型式介紹 TAPTITE PLASTITE TAPTITE CA POINT 三角牙螺絲 TRI