- 1、本文档被系统程序自动判定探测到侵权嫌疑,本站暂时做下架处理。
- 2、如果您确认为侵权,可联系本站左侧在线QQ客服请求删除。我们会保证在24小时内做出处理,应急电话:400-050-0827。
- 3、此文档由网友上传,因疑似侵权的原因,本站不提供该文档下载,只提供部分内容试读。如果您是出版社/作者,看到后可认领文档,您也可以联系本站进行批量认领。
查看更多
AS 3715—2002
A
S
3
7
1
5
Australian Standard™
Metal finishing—Thermoset powder
coatings for architectural applications of
aluminium and aluminium alloys
This Australian Standard was prepared by Committee MT-009, Metal Finishing. It
was approved on behalf of the Council of Standards Australia on 14 June 2002 and
published on 27 June 2002.
The following are represented on Committee MT-009:
Australasian Institute of Metal Finishing
Australian Chamber of Commerce and Industry
Australian Industry Group
Australian Paint Manufacturers’ Federation
Department of Defence (Australia)
Galvanising Association of New Zealand
Institute of Materials Engineering Australasia
New Zealand Abrasive Blasting Association
Powder Coaters Association
Society of Automotive Engineers Australasia
Telstra Corporation
The Royal Australian Chemical Institute
Keeping Standards up-to-date
Standards are living documents which reflect progress in science, technology and
systems. To maintain their currency, all Standards are periodically reviewed, and
new editions are published. Between editions, amendments may be issued.
Standards may also be withdrawn. It is important that readers assure themselves
they are using a current Standard, which should include any amendments which
may have been published since the Standard was purchased.
Detailed information about Standards can be found by visiting the Standards
Australia web site at .au and looking up the relevant Standard
in the on-line catalogue.
Alternatively
文档评论(0)