ETAG 001-6 Metal anchors for use in Concrete Part 6：Anchors for multiple use for non-structural applications混凝土用金属锚具- 符合型非结构锚具.pdf

European Organisation for Technical Approvals Europäische Organisation für Technische Zulassungen Organisation Européenne pour l‘Agrément Technique ETAG 001 Edition August 2003 GUIDELINE FOR EUROPEAN TECHNICAL APPROVAL OF METAL ANCHORS FOR USE IN CONCRETE Part six: ANCHORS FOR MUTIPLE USE FOR NON-STRUCTURAL APPLICATIONS EOTA, Kunstlaan 40 Avenue des Arts, B - 1040 Brussels INTRODUCTORY NOTES In this Part requirements, criteria and test information for metal anchors for multiple use in concrete for non- structural applications are given. The same numbering of paragraphs as in Part 1 is used. If a paragraph is not mentioned, then the text in Part 1 applies without modification. TABLE OF CONTENTS PART SIX: ANCHORS FOR MULTIPLE USE FOR NON-STRUCTURAL APPLICATIONS 2 SCOPE 2.0 General 2.1 Anchors 2.1.1 Types and operating principles 2.1.2 Materials 2.1.3 Dimensions 2.2 Concrete 2.2.1 Materials 2.2.2 Concrete members 2.3 Actions 2.4 Categories 2.6 Definition of multiple anchor use 4 REQUIREMENTS FOR WORKS Temperature Correct installation 4.3 Hygiene, health and the environment 5 METHODS OF VERIFICATION 5.1.2 Tests for suitability 5.1.3 Tests for admissible service conditions 5.3 Methods related to 4.3 (hygiene, health and the environment) 6 ASSESSING AND JUDGING THE FITNESS OF ANCHORS FOR AN INTENDED USE 6.1