强流束流偏角探测器模拟与测试.pdf

Hybrid monitor for both beam position and tilt of pulsed high-current beams J. Pang, X. He, C. Ma, L. Zhao, Q. Li, and Z. Dai Citation: Review of Scientific Instruments 85, 093305 (2014); doi: 10.1063/1.4895643 View online: /10.1063/1.4895643 View Table of Contents: /content/aip/journal/rsi/85/9?ver=pdfcov Published by the AIP Publishing Articles you may be interested in Core-halo issues for a very high intensity beam Appl. Phys. Lett. 104, 074109 (2014); 10.1063/1.4866400 High current ion beam transport using solenoidsa) Rev. Sci. Instrum. 79, 02B704 (2008); 10.1063/1.2801351 Development of bellows and gate valves with a comb-type rf shield for high-current accelerators: Four-year beam test at KEK B-Factory Rev. Sci. Instrum. 78, 043302 (2007); 10.1063/1.2723747 Effects of intensity and position modulation on switched electrode electronics beam position monitor systems at Jefferson Lab AIP Conf. Proc. 546, 541 (2000); 10.1063/1.1342628 Calibration of an advanced photon source linac beam position monitor used for positron position measurement of a beam containing both positrons and electrons AIP Conf. Proc. 451, 325 (1998); 10.1063/1.57014 This article is copyrighted as indicated in the article. Reuse of AIP content is subject to the terms at: /termsconditions. Downloaded to IP: 3 On: Fri, 19 Sep 2014 10:43:52 REVIEW OF SCIENTIFIC INSTRUMENTS 85, 093305 (2014) Hybrid monitor for both beam position and tilt of pulsed high-current beams J. Pang,a) X. He, C. Ma, L. Zhao, Q. Li, and Z. Dai Key Laboratory of Pulsed Power, Institute of Fluid Physics, CAEP, P.O. Box 919-106, Mianyang 621900, Ch