- 1、本文档共63页,可阅读全部内容。
- 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
- 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载。
- 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
西京学院学院本科生毕业设计
延安大学西安创新学院本科生毕业设计
PAGE 24
1
本科毕业论文设计
题 目:
专业名称:
学生姓名:
学生学号:
指导教师:
毕业时间:
PAGE 58
西安交通大学学生公寓楼设计
摘要:本工程为西安交通大学学生公寓楼,位于西安市。本工程总建筑面积约8000㎡。本建筑主体结构5层,总高度18.60m,室内外高差为0.45m。建筑总长度为87.1m,总宽度为17.4m。建筑立面规整,除正门为玻璃门外,其余均采用实木门,窗为铝合金窗。本工程结构形式为钢筋混凝土现浇结构,底层框架梁柱混凝土强度等级为C35,柱截面尺寸为700mm×700mm,梁截面尺寸为350mm×600mm。建筑地点地质条件良好,经济符合要求。设计严格遵守我国现行规范,计算中包括荷载计算,内力组合等。
关键词:建筑设计;结构计算;结构布置;内力计算;配筋计算
The design of Xian Jiaotong
teaching building
Abstract: This works for the Xian Jiaotong University, the main teaching building, located in Xian. The total construction area of 8000 square meters. The main structure of the 5-storey building, with a total height of 18.60 meters, indoor and outdoor relief for the 0.75 meters. Building a total length of 87.1 meters, with a total width of 17.4 meters. Structured building facade, with the exception of the main entrance to the glass door, and the rest are solid wood doors, windows for aluminum alloy window. The form of the engineering structures of reinforced concrete cast-in-place structure, the underlying framework of beams for concrete strength grade C35, column cross-section dimensions of 700 mm × 700 mm, beam size of 350 mm × 600 mm cross-section size of the other column are 600 mm 600 mm, beam size of 300 mm 600 mm. Good geological conditions of construction sites, in line with the requirements of the economy. Strictly abide by Chinas current design standards, including load calculations, the internal force composition.
Keywords: architectural design; structure calculation; structural arrangement; internal force calculation; reinforcement calculated
目 录
TOC \o 1-3 \h \z \u 1工程概况 1
1.1设计原始资料 1
1.1.1气象条件 1
1.1.2工程地质条件 1
1.2建筑设计任务及要求 2
1.2.1设计任务 2
1.2.2设计要求 2
1.2.3设计成果 2
1.3结构设计任务及要求 3
1.3.1设计任务 3
1.3.2设计要求 3
1.3.3设计成果 3
2结构布置及计算简图 4
3重力荷截计算 6
3.1屋面及楼面的永久荷载标准值 6
3.2屋面及楼面可变荷载标准值 7
3
您可能关注的文档
- (2)钢骨混凝土结构.ppt
- 08版PKPM讲义之结构的性能设计.pdf
- 2014年最新机电专业设计标准(给排水 电气).doc
- 6层框架结构综合楼毕业设计计算书.doc
- I形偏心对称受压构件.pdf
- [山东]市政办公大楼空调通风系统施工组织设计.doc
- [武汉]某酒店安装工程施工组织设计.doc
- [河南]医院综合病房楼空调系统施工组织设计.doc
- [滕州]某道路排水工程施工组织设计.doc
- [苏州]某路污水总管工程施工组织设计.doc
- 新的一年工作展望.docx
- 医生年终个人工作的述职报告(3篇).docx
- 2023年消防设施操作员之消防设备中级技能考前冲刺练习题附答案详解.docx
- 2022-2023年环境影响评价工程师之环评技术导则与标准通关练习题包括详细解答.docx
- 2023年中级注册安全工程师之安全生产管理考前冲刺检测卷和答案.docx
- 2023年中级银行从业资格之中级银行管理考前冲刺测试卷提供答案解析.docx
- 2023年公共营养师之二级营养师通关模拟考试试卷附带答案.docx
- 证券分析师之发布证券研究报告业务考前冲刺模拟题库.docx
- 2022-2023年二级建造师之二建建设工程法规及相关知识综合提升测试卷附答案.docx
- 2023年二级建造师之二建机电工程实务通关模拟考试试卷提供答案解析.docx
文档评论(0)