手工飞行计划制作实例.ppt

z 手工吃行计岗制作例 Example of hand-made flight plan 航线:成都(cTU)一广州(cAN) Route: Chengdu(cTU)-Guangzhou (CAN) 航班号:3U8735 Flight number: 3U8735 预计起飞时间:UTc0915 ETD: UTC0915 执飞飞机:B-2299 Registration number: B-2299 CHINA CIVIL AVIATION FLIGHT COLLEGE 中刮员就九(次 1、选择航路(B330航路) 4e Select the route(B330) CHINA CIVIL AVIATION 2、分析天气资料与PB,确定备降机场 el Analyze weather information and PlB, then determine e alternate 天气资料 Weather information 飞行前资料公告PB 深圳与桂林两机场天气条件均适宜做目的地备降场,考虑到深圳机场流控 较为严重,桂林两江机场19号LS不工作,导致备降天气标准提高,查阅桂林机 场01号跑道的标准后确定天气标准为VS800+1600M,DA234+120M,但是桂林 天气较好,在飞机预计到达备降场的时间能见达到300米,因此选择桂林机场 为备降场。 Both Shenzhen and Guilin are suitable for alternates, Shenzhen airport encounters severe flow control, ILS 19 inoperative in Guilin airport, so alternate weather standard is higher, after consulting the standard of runway 01 in Guilin airport, determine weather standard VIS800+1600M, DA234+120M. but weather is better in Guilin. at the estimated time of arriving alternate, vIs reaches 3000, so we choose Guilin airport as alternate. CHINA CIVIL AVIATION FLIGHT COLLEGE 中员朊九日抚 3、准备航路资料 cAr Prepare route information 双流机场20号跑道 SID Shuangliu airport runway20SD 航路图 route map 广州白云机场02L号跑道 STAR Guangzhou Baiyun airport runway 02L STAR 所需查取的信息: Required information 1、起飞机场离场程序代号与航段长度 Departure procedure number in departure airport and legs length 2、各航路点的名称、各航段磁航线角、航段长度、航路 代号 Name of waypoints, MC of each leg,legs length, route number CHINA CIVIL AVIATION FLIGHT COLLEGE 中刮员就九(次 3、目的地机场进场程序代号与航段长度 Approach procedure number in destination and legs length 4、各航段磁差 MV of each leg 4出 填号。 example of filling in route nformation CHINA CIVIL AVIATION FLIGHT COLLEGE 中刮员就九(次 4、航路资料小结 co route summary 高空风温图(FL3 00) Upper wind and temperature chart(FL300) 高空风温图(FL240 Upper wind and temperature chart(FL240) 总航程航程 total distance 飞往目的地机场的平均航线角 average course(degrees)(from departure to destination) 巡航高度 cruise altitude 各航路点巡航高度风温数据 wind and temperature data at cruise altitude for each waypoint 巡航高度平均风、温 average wind