土木工程毕业论文-长春同程科研办公楼建筑、结构、施工设计计算书.doc

长春同程科研办公楼建筑、结构、施工设计 摘 要 本次毕业设计是设计长春同程集团科研办公楼，8层框架结构，底层层高3.9米，其他层层高3.6米，总建筑面积7581平方米。抗震设防烈度为7度。 整个设计分三部分：建筑、结构设计部分和施工部分。 建筑设计通过收集资料，查阅规范，确定建筑方案，绘制建筑平面图、立面图、剖面图及详图。 结构设计首先进行了结构布置，确定梁柱截面尺寸，以及材料强度。然后对结构的在竖向荷载和水平荷载作用下分别进行框架内力计算，并对其进行内力组合。找出最不利的一组或几组内力组合。 选取最安全的结果计算配筋并绘图。此外还进行楼梯和基础设计。本设计采用桩基础，对基础承台进行了受力和配筋计算。 施工部分主要做了两项工作：工程量计算和施工组织设计，施工组织设计包括施工方案设计，安排施工进度计划和绘制施工平面图。部分工序采用平行流水施工，缩短工期。 关键词： 建筑设计；框架结构；内力计算；工程量计算；施工组织设计 Abstract： The graduation design is to design a comprehensive building of Changchun with the research office.It’s nine layers, the frame structure.The first store height is 3.9 meters, The others is 3.6 meters. The overall building height is 30.06 meters.The overall area of structure is 7581 square meter.The intensity of our earthquake is 7 degrees. The whole design divides three parts:The building design is part of,the structure design is part of and start construction part. Structural design is first carried out structural arrangement, determine beam and column size, and material strength.Then carried out force calculation framework for the vertical load and horizontal load force on the structure, and combined thoes forces .Select the most secure computing with the result of the sinews and the drawing.In addition, for the design of stairs and foundation.The design uses a pile foundation, foundation platform carried on by force and reinforcement. The construction part mainly did two works: the bidding quotation and construction organization designconstruction.the bidding including complete list of quotations and tenders。Construction organization design including construction scheme, construction progress plan and drawing construction layout.Part of the process using parallel flow construction, shorten the construction period. Keywords Frame structure；Force calculation；measurement of quantities；Construction organization design PAGE PAGE I PAGE PAGE I 目 录 TOC \o "1-3" \h \u 13310 前言 1 21257 建筑设计部分 31413 1 建筑设计条件 2 6203 1.1 技术条件 2