片剂共用生产线清洁验证方案.doc

片剂共用生产线清洁验证方案 文件编码 SWJ1115?001-00-1 Copy No 安装位置 房间号 起 草 人 日 期 验证小组会签 项目负责人: 年 月 日 QC负责人: 年 月 日 设备部负责人: 年 月 日 生产部负责人: 年 月 日 质量部负责人: 年 月 日 总经理(批准): 年 月 日 分发单位 [][][][]行政部财务部生产部销售部 [][][][]质量部质量部QA室质量部QC室供应部 [][][][]制剂车间包装车间储运部设备部 of induction welder should hold the appropriate qualifications. (4) the laying of 1) grounding wire welding should be used, length and quality of the weld seam construction drawings shall meet requirements and GB50169 provisions after welding the welds and welds should be cleaned, and painted anti-corrosion coatings. Where the extension leads from the grounding should be clearly marked, and decay and break-proof measures of protection. 1) ground wire through the settlement joints or telescopic ... Cabling and wiring in accordance with the relevant requirements. Cable manufacturers representatives under the direction of head, testing, dedicated connections, secondary circuit grounding bolts, control cable grounding of the shield as designed. Construction of cable fireproof plugging the complete Panel, Cabinet hole. 9.6. quality inspection and acceptance (1) steel pipe inspection and acceptance of materials required for pipe installation, welding materials, related connectors and coating material shall be carried out according to this chapter, section 10.2 inspection and acceptance. (2) inspection and acceptance of installation quality of steel 1) steel pipe during the installation process, should in conjunction with 目 录 1 主题内容 2 适用范围 3 职责 4 内容 4.1 概述 4.2验证目的 5 验证用仪器工具及文件资料 6 验证可接受标准及依据 7 岗位及设备的清场清洁操作 8 检查与取样操作 9 验证检验 10 验证批次 11验证检测结果 12 验证结论 13、偏差与漏项 of induction welder should hold the appropriate qualifications. (4) the laying of 1) grounding wire welding should be used, length and quality of the weld seam construction drawings shall meet requirements and GB50169 provisions after welding the welds and welds should be cleaned, and painted anti-corrosion coatings. Where the extension leads from the grounding should be