XXX厂区施工测量方案.docVIP

摘 要 本工程为安徽忠旺铝合金精深加工有限公司厂区建设，由安徽忠旺集团建设，由机械工业第六设计研究院设计。在工程施工中测量工作是一项极为重要的基础性工作，测量工作贯穿整个施工过程，测量中的任何一个错误都会导致整体工程出现偏差甚至引起更大后果，轻则返工影响工期，重则整体工程报废甚至造成安全生产事故，给工程带来巨大损失。本文以该项目为例进行施工测量方案设计编写，根据项目施工的过程及相关测量规范制定本工程施工测量的具体实施方案和规定，严格控制测量过程中的各项误差。在测量中广泛采用较为先进的GPS测量提高测量精度及作业效率，同时在一些对测量精度要求较高的地方也采用全站仪等传统测量仪器与方法加以比对使施工精度大大提高。根据本文的技术设计内容体现出GPS测量在工程测量中的优势。 关键词：工程测量；GPS测量；GPS-RTK放样 Abstract This project is Anhui Zhongwang Aluminum Alloy Deep Processing LTD plant construction. Construction by Anhui Zhongwang LTD designed by SIPPR ENGINEERING GROUP LTD. Measurements in the engineering construction is a very important basic work, measurement throughout the entire construction process, any error in measurement will cause the overall engineering deviation cause greater consequences, even light rework affect the time limit for a project, or the overall project scrap or even cause safety accidents, to project bring great loss. This paper takes this project as an example to design and compile the construction survey plan. According to the project construction process and related survey specifications, the specific implementation plan and regulations of this project construction survey are formulated to strictly control the errors in the survey process. In the survey widely uses the more advanced GPS survey to enhance the survey precision and the work efficiency, simultaneously in some places which requests highly to the survey precision also uses the total station and so on traditional survey instrument and the method to compare causes the construction precision to enhance greatly. According to the technical design content of this paper, the advantages of GPS measurement in engineering measurement are reflected. Key Words: engineering surveying ; GPS surveying ;GPS-RTK setting-out survey 目 录 TOC \o "1-3" \h \z \u 第1章 工程概况 1 1.1 项目概况 1 1.2 自然地理概况 1 第2章 编制依据和原则 2 2.1 编制依据 2 2.2 编制原则 2 第3章 测量仪器与人员配备 3 第4章 测量准备 4 4.1 交接桩 4 4.2 前期准备 4 4.3 施工图纸准备 4 第5章 控制测量 5