- 1、本文档共32页,可阅读全部内容。
- 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
- 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载。
- 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
亲,这是专业人士做的,绝对合格的。请放心。已经通过答辩!
摘 要
本论文就是将塑料水果篮作为设计模型,将大学所学理论知识、课外专业参考资料及相关知识网站作为设计注射模具的理论依据,阐述塑料注射模具的设计过程。
通过对塑料水果篮成型工艺的正确分析,设计了一副一模一腔的塑料模具。模具中决定塑件几何形状和尺寸的零部件称为成型零件,包括前模板、前模、后模板、后模仁等的设计与加工工艺过程。成型零部件在工作时直接与塑料接触,在一定的温度下承受熔体的高温和高压,因此必须要有合理的结构、较高的强度和刚度、较好的耐磨性、正确的几何形状、较高的尺寸精度和较低的表面粗糙度。重要零件的工艺参数的选择与计算,推出机构与浇注系统以及其它结构的设计过程。
设计成型零部件时,应根据塑料的特性、塑件的结构和使用要求,确定型腔的总体布局,选择分型面,确定脱模方式,设计浇注系统、排溢系统等,然后根据加工工艺和装配工艺的要求进行成型零部件的结构设计,计算成型零部件的工作尺寸校核。最后使用MPI软件可以全面模拟注塑成型过程,并以图形的方式直观地显示分析结果。
关键词:水果篮;工艺分析;注射模;MPI
Abstract
This thesis is to plastic fruit basket as a design model, the university learned theory knowledge, extracurricular resources and related professional knowledge site as the theoretical basis of the design of injection mould of plastic injection mold design process.
Through the correct analysis of plastic fruit basket molding process, designed a pair of one module and one cavity plastic mold. Mold in geometry and size of the plastic parts called molding parts, including former templates, template, back mould kernel, etc before mold, after the design and machining process. Molding parts in direct contact with the plastic at work, at a certain temperature melt under high temperature and high pressure, so there must be a reasonable structure, high strength and stiffness, good abrasion resistance and correct geometry, high dimensional accuracy and low surface roughness. Important parts of the process parameters selection and calculation, and the extrusion outfit, inject system and other structures of the design process.
Design of molding parts, should according to the characteristics of plastic and plastic parts structure and use of the requirements, determine the overall distribution of cavity, choose the parting surface, parting ways, for sure, design of gating system and overflow system, etc., and then according to the requirement of the machining process and assembly process for molding parts structure design, dimension checking calculation of molding parts work. Finally using the MPI software can be fu
您可能关注的文档
- 齿轮式无级变速器设计论文.doc
- 齿轮油泵的生产管理系统设计说明书.doc
- 齿轮油泵仿真设计论文.doc
- 稠厚物料灌装机构设计说明书.doc
- 吹风机外壳的模具设计与加工说明书.doc
- 磁环车间的零件管理系统设计说明书.doc
- 磁力式拧瓶机的设计及工程分析说明书.doc
- 存折翻页机的传动设计说明书.doc
- 打印机齿轮注塑模设计说明书.doc
- 单臂液压铸造机设计说明书.doc
- 仓库保管员述职报告 仓库保管员述职报告总结 (21篇).docx
- 教师高级职称述职报告 教师高级职称述职报告要求字数多少 (17篇).docx
- 加油站经理述职报告 加油站经理述职报告2023年 (17篇).docx
- 销售主管述职报告范文 销售主管述职报告范文大全 (17篇).docx
- 机修班长述职报告 机修班长述职报告 (20篇).docx
- 村干部半年述职报告 村干部半年述职报告 (17篇).docx
- 学生会组织部述职报告 (15篇).docx
- 教师职称评定述职报告 初中教师职称评定述职报告 (17篇).docx
- 信贷述职报告 信贷述职报告怎么写 (17篇).docx
- 入党述职报告范文 入党述职报告范文大全 (19篇).docx
文档评论(0)