Cisco1131AgAP配置详细解析.docxVIP

1、 配置设备管理地址 用console登陆到设备中，回车。 出现AP> AP>enable 回车 Password : Cisco (注意大小写) AP#config t AP(config)#int bvi1 AP (config-if)#ip add 172.16.100.X AP (config-if)#no shut AP (config-if)#exit AP(config)# ip default-gateway 54 AP(config)#exit AP#wr (保存配置 ) 注意： 红色字体部分是 ap 的管理地址和网管地址，这些地址根据 ap 所连接端口，所在 vlan 网段相 关。 2 、 配置 SSID 信息 打开 IE 窗口 键入 http ： // ap 的管理地址 用户名 cisco 密码 Cisco ( 注意大小写 ) HOME EyRE 竺乎 TyP EXPRESS SECURITY NETWORK MAP ASSOCIATION NETWORK INTERFACES SERVICES WIRELESS SERVICED SYSTEM SOFTWARE EVENT LOG HosliMine CHEC_1_1 Expre^ Set Up Host Name: MAC Addiess! Configuration Server Protocol: IP Address: IP Subnet Mask: Default Gdiewdy: SNMP Commutiity: CHEC 1 1 001d.e557.6456 DHCP 心 Static IP drfaultComunit^ ￡ Read-Only Read-Write 点击左侧“ express setup ”，在右侧“ host name ” 一栏中填入你想要的主机名，不修改也行 HOME EXPRESS SET-UP EXPRESS SECURrTY NEIWORkMAF + ASSOCIATION + NETWORK INTERFACES SECURITY Admin Access Encryption Manager SSID Server Manager AP Authentication Intrusion Detectior Local RADIUS Serveir AftvanceJ Security SERVICES + WIRELESS SERVICES + SYSTEM SOFTWARE + EVEhTTLOG + Hosti i^ii lie €HEC 1 1 Security: Global SSID Manager SSID Properties Current SSID List < NEW > checl-l SSID: VLAN: Interface: Network ID: Delete < WWE > T Define VU\Ms Etack jp 1: Sackjp 2: Backup 3: □ Padio0-802.11G lRadio1-602.HA (0-4096) 点击左侧“ security 下ssid manager ”，右侧ssid 一栏中填入“自定义的名字” ，将“ RadioO ”和 Radiol ”前面打上“对勾”。拖动右侧的活动条到下图: Multiple BSSID Be aeon Settings Multiple BSSID Beacon .]Set SSID as Gue^t Mode ISet DataBeacon R^te (DTIM): DISABLED Mpply Cancel 点击“ apply Guest Mode Infrostructure SSID Settings Radio0<802.11G: Set Beacon Made' * Single BSSID Multiple BSSID Set Single Guesl iviode SSID: checl-1 〒 Set Infrastructure SSID： < NONE > w Force Infrastructure Devices to only to this SSID Radiol-802.11 A: Set Beacon Mode ? Single BSSID nutif.le CGGID Set Single Guest Mode SSID: 匚heel-1 ▼ Set Infrastructure SSID < NONE > V Force Infrastructure Devices to associate only to this SSID Apply Cance